Hereward Posted February 21, 2018 Share Posted February 21, 2018 My John Connor Rebuild Anglo has the usual round hole on either metal end-plate for the maker's name but they are both blank and just empty holes. Is this usual and/or a problem? I don't want to mess with this and cover them (by making a label) unless it's thought necessary. However, the maker's name doesn't appear anywhere that I can find and that may mean in years to come, when it gets passed on, no-one may remember who made it. Link to comment Share on other sites More sharing options...
alex_holden Posted February 21, 2018 Share Posted February 21, 2018 You could write it in pencil inside somewhere. Link to comment Share on other sites More sharing options...
Rod Posted February 21, 2018 Share Posted February 21, 2018 My ‘Shire’ Anglo is identified by stamping ?/ engraving?/ etching ? In the space on the left hand grill which mirrors the position of the air button on the right hand grill. Link to comment Share on other sites More sharing options...
Hereward Posted February 21, 2018 Author Share Posted February 21, 2018 (edited) Is the 'Shire' by Connor? I have seen his own models named down the middle as it were and I suppose that may be what you refer to. Edited because I now see it is another maker. Edited February 21, 2018 by Hereward Link to comment Share on other sites More sharing options...
Rod Posted February 21, 2018 Share Posted February 21, 2018 No connection. The history of Shire Concertinas is well documented on this website. Link to comment Share on other sites More sharing options...
d.elliott Posted February 21, 2018 Share Posted February 21, 2018 Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here. Dave Link to comment Share on other sites More sharing options...
nicx66 Posted February 21, 2018 Share Posted February 21, 2018 Mine, which is a standard model Connor anglo in C/G, has 'CONNOR' marked between the top and middle row of buttons on both ends. Link to comment Share on other sites More sharing options...
Hereward Posted February 21, 2018 Author Share Posted February 21, 2018 Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here. Dave The whole instrument was built by Connor except for the reed pans and reeds which are Wheatstone. I don't know anything else about it. Link to comment Share on other sites More sharing options...
Takayuki YAGI Posted February 22, 2018 Share Posted February 22, 2018 As far as I know, Connor rebuild models are produced by John Connor in collaboration with Barleycorn(Chris Alger) using Wheatstone or Lachenal reeds. Mine is built by Connor (including reedpan) with old Lachenal reeds and has no makers name outside. Inside of the instrument there is a stamp of Barleycorn. Link to comment Share on other sites More sharing options...
Hereward Posted February 22, 2018 Author Share Posted February 22, 2018 As far as I know, Connor rebuild models are produced by John Connor in collaboration with Barleycorn(Chris Alger) using Wheatstone or Lachenal reeds. Mine is built by Connor (including reedpan) with old Lachenal reeds and has no makers name outside. Inside of the instrument there is a stamp of Barleycorn. Thank you. So it sounds to me that mine is similar to yours. John Connor is now retired. Link to comment Share on other sites More sharing options...
d.elliott Posted February 22, 2018 Share Posted February 22, 2018 Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here. Dave The whole instrument was built by Connor except for the reed pans and reeds which are Wheatstone. I don't know anything else about it. I Seem to remember, and I am fairly certain about this that these instruments were known a 'Phoenix' instruments, rising out of the ashes and all that. Nothing to do with a certain H Potter... Dave Link to comment Share on other sites More sharing options...
Takayuki YAGI Posted February 22, 2018 Share Posted February 22, 2018 Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here. Dave The whole instrument was built by Connor except for the reed pans and reeds which are Wheatstone. I don't know anything else about it. I Seem to remember, and I am fairly certain about this that these instruments were known a 'Phoenix' instruments, rising out of the ashes and all that. Nothing to do with a certain H Potter... Dave I think that is Wakker Phoenix. Collaboration work by Wim Wakker and Barleycorn. I think Connor rebuild do not have such name... Link to comment Share on other sites More sharing options...
Hereward Posted February 22, 2018 Author Share Posted February 22, 2018 That is a shame. Call me a romantic but 'Phoenix' sounds better than 'no name at all'. Link to comment Share on other sites More sharing options...
LateToTheGame Posted March 9, 2018 Share Posted March 9, 2018 my conner has conner stamped in the ends and a brass label on the hand rail that says Barleycorn Concertina. I think Chris Alger's name is on that plate as well, but I don't have the instrument with me to check. Link to comment Share on other sites More sharing options...
Hereward Posted March 9, 2018 Author Share Posted March 9, 2018 my conner has conner stamped in the ends and a brass label on the hand rail that says Barleycorn Concertina. I think Chris Alger's name is on that plate as well, but I don't have the instrument with me to check. It is certainly interesting that your instrument features this because none of the others I have heard tell of do. Link to comment Share on other sites More sharing options...
LateToTheGame Posted March 18, 2018 Share Posted March 18, 2018 Yes, the brass plate exists. If I were smart enough I'd attach a picture, but I don't know how. I do have the concertina in front of me right now. It is an older one of his. The end plates look more detailed than the newer ones I have seen. I got it used from Chris Alger when its owner moved up to her Dipper. That was in the early 90's or maybe even the late 80s. And it is now my second concertina as I have moved up to a Dipper as well for daily play. The plate is brass, but only has the word Barleycorn, not Chris Alger's name as I first thought. It is funny how memory works. The imprint CONNER runs along the rows above the c row. It does not have a hole for a nameplate. The original owner wrote her name and "stolen from" inside, but you have to take it apart to see the details. When I emailed Chris Alger regarding this concertina last year he not only remembered seeing that writing, but remembered the owner's name and where she moved to as an adult. It is an interestingly small world. I got it before hybrids were a thing so I was fortunate to learn to play on a concertina reeded instrument. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now