Mjolnir Posted October 4, 2017 Share Posted October 4, 2017 I'm slowly learning to play my Rochelle anglo, and having a blast, but as I've expanded the set of notes I'm using, I'm noticing a few that don't play cleanly. I've heard mention of buzzing reeds, and I'm not sure if this is that, but in addition to the note, I get secondary sound that's sort of...I guess I'd describe it as kind of an air-y sound, but with a bit of texture to it, like sucking through a straw in a just-about-empty glass. It only seems to happen in one direction - that is, on the draw for the F, but not the push for the G, and likewise the push for the E, but not the draw for the D. It also seems to be more noticeable if I have the relevant end of the instrument at a tilt, as opposed to perpendicular to the ground.Any ideas? And if so, is it something that I could even remotely conceive of looking at myself (I wouldn't consider myself particularly handy with tools), or should I just live with it (it's not too bad, and doesn't stop me enjoying playing) until I upgrade to a better instrument? There is also the shop where I got it from, but it's a non-trivial drive, and has inconvenient hours for me. Thanks Link to comment Share on other sites More sharing options...
Geoff Wooff Posted October 4, 2017 Share Posted October 4, 2017 From your description it is probably a valve that is not seating properly. I would take it back to the shop or find an accordion repairer who might be willing to sort it out. Link to comment Share on other sites More sharing options...
Don Taylor Posted October 4, 2017 Share Posted October 4, 2017 (edited) Concertina Connection boxes like the Rochelle, Elise, etc... sometimes resonate at the lever point of the action. This what Wim Wakker (the maker) told me when I asked him about it: "The problem with an unbushed action is that the vibration of the reeds cause the button to vibrate on the lever. The clearance between them is about 0.1mm. Usually there is only one or 2 buttons that vibrate. If you shim the levers make sure the material is thin and allows the button to move back and forth. If the joint is too tight, the button will prevent the pad to close all the way. There are 3 ways you can dampen vibration in a metal action (all used for decades in the accordion industry) 1 shim with paper/plastic 2 apply some grease 3 glue foam type material on the buttom, making sure it also touches the lever." I found that simply disassembling, poking at the offending lever a bit and then reassembling would stop the resonance. Occasionally another button would start resonating instead, but I repeated the procedure until it was cured. I tried to slip paper into the gap but there was not enough room. I was unwilling to start greasing the internals of my Elise and never got around to glueing some foam in place. Edited October 4, 2017 by Don Taylor Link to comment Share on other sites More sharing options...
d.elliott Posted October 4, 2017 Share Posted October 4, 2017 My view is that it either a valve or a note which has started to come away from it's wax be Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now