Attaching a pad

[Rolf Gidlow]

I just received my new Morse Ceili two days ago. Just now a pad came loose and needs to be re-attached. (I'm able to position the pad and the arm holds it in place, making the instrument playable, but obviously I cannot use that key.) The other pads appear to be attached with a drop of clear glue. Is this something I can do myself, or should I return it for repair?

[Leo]

Hi Rolf

 

The first thing, if it were me, would be to call them directly and see if they have any suggestions. Since they made it, they would be the best judge. If you're not too far away, then stop in.

 

And congratulations on your new concertina.

 

Thanks

Leo

[Rolf Gidlow]

Thanks Leo. Of course the pad came loose shortly after the Button Box closed for the weekend, and I was hoping that there was something that I could do before they're available again on Monday. Since it's a warranty issue it's probably best to leave it alone, I know. I just didn't want to have to leave it alone until Monday. The pad in question is in the accidental row and is a key not often used, so I cam get by until then. Thanks again.

[Michael Reid]

Rolf, of course The Button Box will help you out, but this is an easy repair you can handle on your own.

 

Having dealt with this problem myself, I know that The Button Box recommends a flexible white glue, Sobo Premium Craft & Fabric Glue. You can probably find it at a fabric store, craft shop, or a well-stocked hardware store. Just put a drop on the pad and let the "donut" on the end of the arm down onto it. The spring action provides all the clamping power needed while the glue dries.

[Leo]

Hi Rolf

 

Thoughtless of me, I forgot it was the weekend. 40 years of working in a schedule that runs monthly has me accustomed to a 30 day cycle with no weekends or holidays, and it has gotten me into more trouble than you know. You'd think since I retired, I would get used to a normal human schedule. Sorry about that.

 

I've been fortunate (no surprise) with my Morse Albion in that I've not had any problems with it other than constantly moving buttons. They never stay in one place and keep moving from where my finger think they ought to be, but they seem to be a little tamer now. It's a problem that seems to have no fix.

 

Michael has a good suggestion. I vaguely remember from other posts.

 

Thanks

Leo

[Rolf Gidlow]

Fortunately, I live near enough to the Button Box to be able to get down there if necessary (though it takes most of a day). I was able to get down there yesterday and let Bob take care of the problem. Thank you for the replies and suggestions - they helped, and I'm hoping I'll be more prepared next time.