Jump to content

How To Make A Tuning Jig For Traditional Reeeds?


Recommended Posts

Correct observation. the reed is sounded with the reed side down. the foam and your fingers plus positioning make the seal. it is more difficult to sound the longer reed sometimes, but it does work. eventually i would like to make the type that has been pictured here. some long winter.. wes.

Link to comment
Share on other sites

If I understand correctly what Wes describes, there would appear to be a fatal flaw in that, in order for a reed to sound, air has to be drawn through it from the tongue side, not blown through from underneath.

 

Now, ...a vacuum pump.....

I would stick to the bellows and plate - tried and tested :)

 

Cheers

 

Dave

 

 

I agree to get the right Sound you should move the air down into the reed.

 

But shouldn't the reed oscillate with the same frequency whether the air is Coming or Going for the same flow rate through the vent hole in the sound board or am I missing something?

 

Dan

Link to comment
Share on other sites

am I missing something?

 

Dan

 

Hello Dan, you should read this article on concertina reeds. Blowing through the frame will not result in any sound at all, the reed needs to be drawn down into the frame slot in order for a note to be played. The reed tongue itself makes no sound, it is the air passing through the small gap around the tongue, between it and frame, that makes the note we hear. Blowing air through the frame would only push the reed away from the slot resulting in no sound at all.

Link to comment
Share on other sites

Correct observation. the reed is sounded with the reed side down. the foam and your fingers plus positioning make the seal. it is more difficult to sound the longer reed sometimes, but it does work. eventually i would like to make the type that has been pictured here. some long winter.. wes.

 

 

Hi Dan,

 

The reed will only sound one way. For a good description of why this is check out this link:

 

http://www.concertinaconnection.com/concertina%20reeds.htm

 

Cheers Dave

 

Beaten on the draw by tallship :o)

Edited by Dave Prebble
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...