Chris L Posted July 5, 2024 Posted July 5, 2024 Hello Concertina friends! So I have a nicely made but mysterious-no-branding anglo concertina I bought on Ebay about 8 years ago. Alas, one of the reeds has broken and needs to be replaced. I know my instrument uses accordion reeds and that the reed in question is a "B" (push in on 2nd finger, right hand). I feel confident enough to replace it at this point, however, I don't know what octave to order. Hohner seems to sell replacements listed in octaves 2-8, but I don't know which one to get! Any answers?
Ken_Coles Posted July 5, 2024 Posted July 5, 2024 Is this an anglo, or English/Duet? That tells us if the note is the same in both bellows directions or not. Easier than chasing down a reed to order from Hohner might be to go to anyone who works on piano and button accordions and see if they have a reed that would fit. I don't know if there is such a person on Cape Cod but there should be in the Boston area, I would think. OTOH, Others here may have better ideas. Ken
Chris L Posted July 5, 2024 Author Posted July 5, 2024 It’s an Anglo, so B on the push. Also, I’m in Colorado performing for the month so Boston unfortunately is not an option at the moment.
SIMON GABRIELOW Posted July 6, 2024 Posted July 6, 2024 (edited) The hohner company no longer exists but an Italian company uses some of the machinery that Brunner Música [the ones that often made the concertinas/ with hohner name on and Stagi ] had used - and make their units now in Italy [featured by one of our members on this C.net site] maybe they will have some reeds? and may be very similar? [Concertina Italia]. I have my own hohner branded [ Italian made] Anglo 30 key - which I have owned now for 25 plus years. [ steel reeds also]. At that time I got spare buttons sent free from a company that is no longer in business [ Brunner musica] - so the company above may be best now. Edited July 6, 2024 by SIMON GABRIELOW
Jesse Smith Posted July 6, 2024 Posted July 6, 2024 I'm pretty sure that's B5 if it's a standard C/G anglo.
David Lay Posted July 6, 2024 Posted July 6, 2024 (edited) This chart shows a piano keyboard on the left and data for each key. My red marks show the range of my Anglo C/G concertina. The "scientific name" column tells you the note and octave #. Correlate your missing note to a piano key and you will have it. Edited July 6, 2024 by David Lay
AndyNT Posted July 6, 2024 Posted July 6, 2024 This web site is very helpful in sorting out Anglo notes - https://anglopiano.com/ Accordion reeds are paired (push/pull) on one plate, so you will need a A5/B5 reed plate. Definitely look for someone repairing button accordions as they are most likely to have a suitable spare reed plates. Perhaps Contact Scott at https://bellingersbuttonboxes.com/ If he can't help, he'll likely know someone..... (1-585-208-9617).
Wolf Molkentin Posted July 8, 2024 Posted July 8, 2024 On 7/6/2024 at 2:07 AM, SIMON GABRIELOW said: The hohner company no longer exists but an Italian company uses some of the machinery that Brunner Música [the ones that often made the concertinas/ with hohner name on and Stagi ] had used - and make their units now in Italy [featured by one of our members on this C.net site] maybe they will have some reeds? and may be very similar? [Concertina Italia]. I have my own hohner branded [ Italian made] Anglo 30 key - which I have owned now for 25 plus years. [ steel reeds also]. At that time I got spare buttons sent free from a company that is no longer in business [ Brunner musica] - so the company above may be best now. folks at Hohner (in Trossingen/Germany) might firmly object, and rightly so - their company undoubtedly exists, just probably not any more as a manufacturer of concertinas 😊
SIMON GABRIELOW Posted July 11, 2024 Posted July 11, 2024 Good to know this as my first anglo was made in that part of Germany🌝 1
Owen Anderson Posted July 18, 2024 Posted July 18, 2024 Kimric Smythe at Smythe’s Accordion Center in California was able to replace a reed for me in a Marcus concertina. He had a wide range of donor reeds from various instruments to choose from, and was able to do some hand tweaking to get the tone as matched to the other reeds of the instrument as possible.
RogerT Posted July 18, 2024 Posted July 18, 2024 I think you can buy genuine Hohner reed plates (and other parts) from their 'C Shop'. See here…they appear to have an outlet for the US and Canada. https://www.hohnershop.com
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now