david robertson Posted March 11 Share Posted March 11 I recently acquired this pretty little English treble... presumably by one of the minor makers, but which one? It has delicate German silver corner inlays, and all the corners are brass bound. The bellows papers are the gold & cream "3 daisies" pattern, the reed tongues are riveted rather than clamped, and the riveted action features slotted cylindrical pivot posts. All suggestions gratefully received. Quote Link to comment Share on other sites More sharing options...
4to5to6 Posted July 15 Share Posted July 15 Very interesting instrument. Did you ever find any clues to who built it? Quote Link to comment Share on other sites More sharing options...
malcolm clapp Posted July 16 Share Posted July 16 I have only ever seen daisy wheel papers on Wheatstones, (I own one such), so they, or the entire bellows, may have been replaced as I can see little evidence of this concertina being of Wheatstone origin, though riveted reeds were a feature of some late C19th Wheatstone models. Brass bound corners (campaign wear, as the auctioneers call it) seem to perhaps indicate use by a member of the military, or at least of some profession where a fair amount of overseas travel in potentially hostile environments may have been involved (missionary work in tropical climes perhaps?) (All just random speculation for which I will happily stand corrected....) Quote Link to comment Share on other sites More sharing options...
Geoffrey Crabb Posted July 16 Share Posted July 16 Nickolds, Scates, Austin or Ebblewhite possibly by the action . The latter used riveted reeds in some instruments. Fancy bellows papers were rarely done in-house and could be chosen from printers pattern books. Just suggestions. Geoff. Quote Link to comment Share on other sites More sharing options...
4to5to6 Posted July 16 Share Posted July 16 A photo of the reed plate would be helpful. Does it have riveted reeds? Quote Link to comment Share on other sites More sharing options...
Stephen Chambers Posted July 17 Share Posted July 17 With riveted reeds and those bellows papers you'd suspect Wheatstone's may have made those parts in the Edward Chidley snr. years, but the high-quality ends with no rebate around the edge are more old-fashioned (for the quality of them) and appear to be the work of another maker. I'd suggest it's either a major rebuild that was done at Wheatstone's, or a "marriage" of parts from two concertinas. But more photos might tell another story... Quote Link to comment Share on other sites More sharing options...
david robertson Posted July 21 Author Share Posted July 21 Many thanks to everyone for your suggestions. I'll post a few more pics when I've got a few minutes to spare. Quote Link to comment Share on other sites More sharing options...
david robertson Posted July 25 Author Share Posted July 25 Stephen, you're right as usual - it's a marriage. The action boxes, end covers and bellows are all stamped with the serial number 1274 The reedpans have the same number, but only in handwritten form, and they are clearly not original. From the positioning of the support blocks in the bellows, it is obvious that the original reedpans were of the tapered design, with deeper chambers for the lower notes. The replacement flat pans have been adapted by gluing on little blocks of wood, of varying thickness, which correspond to the support blocks. I wondered at first why whoever fitted them didn't simply build up or move the support blocks, but I suppose it would have been easier to adjust the thickness of the blocks glued to the reedpans, rather than furtling around inside the ends of the bellows. 1 Quote Link to comment Share on other sites More sharing options...
Stephen Chambers Posted July 25 Share Posted July 25 30 minutes ago, david robertson said: The reedpans have the same number, but only in handwritten form, and they are clearly not original. From the positioning of the support blocks in the bellows, it is obvious that the original reedpans were of the tapered design, with deeper chambers for the lower notes. The replacement flat pans have been adapted by gluing on little blocks of wood, of varying thickness, which correspond to the support blocks. I wondered at first why whoever fitted them didn't simply build up or move the support blocks, but I suppose it would have been easier to adjust the thickness of the blocks glued to the reedpans, rather than furtling around inside the ends of the bellows. Maybe they wanted to still be able to use the original reedpans, and their reeds too - for a different tone/pitch/key/intonation? You'd sometimes find concertinas that were made with alternative reedpans for such reasons, and I have an early French accordion with additional reedpans, in two alternative keys, in a "secret" compartment beneath the instrument in its case. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.