nils Posted May 19, 2005 Posted May 19, 2005 There are initials in the fretwork of my New Model. Does anybody know the meaning? Nils
JimLucas Posted May 19, 2005 Posted May 19, 2005 I see no intials!<{POST_SNAPBACK}> I see what Nils is referring to, but I believe it's just a coincidence of the curlicues in the design. With a bit of imagination, I can also see an "S" below the inner edge of the thumbstrap in the full photo, a "G" left of center at the bottom, which could also be the lower loop of a cursive "E". If those curves were really meant to be initials, they would be clearer, as in the Boyd, Salvation Army, and SM instruments. (Sorry, no time to locate links to those right now.)
Stephen Chambers Posted May 20, 2005 Posted May 20, 2005 If those curves were really meant to be initials, they would be clearer, as in the Boyd, Salvation Army ... instruments. (Sorry, no time to locate links to those right now.)<{POST_SNAPBACK}> Here is the H.Boyd name: And S, to the left of the buttons, and A, to the right, for Salvation Army:
geoffwright Posted May 20, 2005 Posted May 20, 2005 If you look hard enough and use some imagination, you will also see 666 in the fretwork. Do not be alarmed. Psychologists sometimes use concertina fretwork as a Rorschach test for musicians. If you can see naked ladies or pint pots in the fretwork, you are normal.
RELCOLLECT Posted May 20, 2005 Posted May 20, 2005 If you can see naked ladies or pint pots in the fretwork, you are normal. What if I see Naked ladies holding pints beckoning me?
nils Posted May 20, 2005 Author Posted May 20, 2005 Thanks for your skillful observations, but my "Beautiful Mind" is still convinced those patterns are letters. Reasons: There is no other spot with a similar pattern in the fretwork, other patterns are repeated. I havn't seen any other concertina with a fretwork where I could find "accidental" letters. The 19th century craftsmen designed their concertinas very carefully, so a piece of fretwork that could be taken for something it was not meant to be would not have been acceptable. If this fretwork keeps it's secret, maybe you've got one with another riddle in it? Nils
RELCOLLECT Posted May 20, 2005 Posted May 20, 2005 If this fretwork keeps it's secret, maybe you've got one with another riddle in it? I still don't see those letters.....I do, however, see the wrod "Coors" to the left of the finger rest....
Stephen Chambers Posted May 20, 2005 Posted May 20, 2005 I still don't see those letters.....I do, however, see the wrod "Coors" to the left of the finger rest....<{POST_SNAPBACK}> Now if you had said you thought you saw "the wrod Bass to the left of the finger rest...."
Boney Posted May 20, 2005 Posted May 20, 2005 It think they probably are letters, intentionally put there. The "y" especially has a very different look from the rest of the fretwork. There's no other clean "U" shape like that anywhere else on that end.
JimLucas Posted May 20, 2005 Posted May 20, 2005 It think they probably are letters, intentionally put there. The "y" especially has a very different look from the rest of the fretwork. There's no other clean "U" shape like that anywhere else on that end.<{POST_SNAPBACK}> Then shouldn't it be interpreted as a "U", rather than a "Y"? The "tail" of the "Y" trails off into a divided leaflet, as does the bottom of the "C" curve, and I personally don't think even the "U" is anywhere near as "clean" as any of the letters in the "H Boyd" or "S A" examples. In fact, the "S" lying on its side above the alleged "YC" is much cleaner, though I don't think that was intended as a letter, either. But distorted versions of the "S" and "C", as well as several other elements, are mirrored in distorted form on the opposite side of the center line. Yet none of the elements are mirrored exactly, which is why I wouldn't be surprised that a juxtaposition of different imprecise patterns could produce something suggestive purely by coincidence.
David Barnert Posted May 22, 2005 Posted May 22, 2005 For anyone still having trouble seeing it, I have highlighted it here. I included the end bolt at the top left for orientation.
Greg Jowaisas Posted May 22, 2005 Posted May 22, 2005 (edited) Now this is no reflection on Nils conviction that he is seeing letters in his fretwork. But I'll be a bit crass and suggest I've started seeing something in the fretwork of a large duet I have. I think I can make it out. Yes, of course, it says: "Your message here! Contact Greg J for rental details!" (Nickel silver, wood, or Dr. Dave"s neon available) (My apologies, Nils. I couldn't resist!) Greg J Edited May 22, 2005 by Greg Jowaisas
David Barnert Posted May 22, 2005 Posted May 22, 2005 With a bit of imagination, I can also see an "S" below the inner edge of the thumbstrap in the full photo, a "G" left of center at the bottom, which could also be the lower loop of a cursive "E".<{POST_SNAPBACK}> Perhaps, but these examples are mirrored symmetrically in the fretwork on the other side of an imagined vertical center line. The "YC" isn't. In fact, if you take the photo of the full side and compare it with a horizontally flipped version of the same picture, you will see that it is virtually all symmetrical (at least approximately) except around the edges of the buttons, the pinky rest and the thumb strap.
JimLucas Posted May 22, 2005 Posted May 22, 2005 With a bit of imagination, I can also see an "S" below the inner edge of the thumbstrap in the full photo, a "G" left of center at the bottom, which could also be the lower loop of a cursive "E".<{POST_SNAPBACK}> Perhaps, but these examples are mirrored symmetrically in the fretwork on the other side of an imagined vertical center line. The "YC" isn't. In fact, if you take the photo of the full side and compare it with a horizontally flipped version of the same picture, you will see that it is virtually all symmetrical (at least approximately) except around the edges of the buttons, the pinky rest and the thumb strap.<{POST_SNAPBACK}> I myself mentioned the approximate -- or as I said, "distorted" -- mirroring. I also pointed out -- verbally, since I'm not able to mark up an image as you did -- that at least the "C" of the purported "YC" is so mirrored. So are the "tail" of the "Y" (emerging from between the first two rows of buttons to right of center), its splitting into three leaflets (David, why did you exclude the other two leaflets from your coloring of the tail? they are not independent), and the extended curl which diverges from the tail's lower side (diverging just as the right-of-center "tail" exits the buttons). In fact, there's an arc on the right side which, though not as tightly curved, touches both the "S" above and the extended curl below in much the same way as the curl at the top left of the "Y" (or "U"). So the only "unique" feature of the purported "YC" is the reflexing of that particular left-side curl. Hardly definitive of a 2-letter monogram, in my estimation. Apart from the lack of clarity and ambiguity of the "Y" (or is it a "U"?) and the "C" (or is it a "G"?), I would expect that explicitly incorporated letters would be highlighted by deliberately not having any of their parts "mirrored". That's certainly the case with the "SA" and "H Boyd".
Stephen Chambers Posted May 22, 2005 Posted May 22, 2005 (edited) ... these examples are mirrored symmetrically in the fretwork on the other side of an imagined vertical center line. The "YC" isn't. <{POST_SNAPBACK}> As far as I can see the "c" is echoed on the other side of the centre line, but it replaces the "y" device, which is necessary simply because the fingering layout requires a shorter device on that side. The fretwork can never be symmetrical at that point because the key layout isn't. Edited May 23, 2005 by Stephen Chambers
mike byrne Posted May 22, 2005 Posted May 22, 2005 It must be catching, I can see letters on my fretwork!
Stephen Chambers Posted May 22, 2005 Posted May 22, 2005 It must be catching, I can see letters on my fretwork!<{POST_SNAPBACK}> Must be catching, I found the same ones in the end of my Lachenal & Co. semi-miniature too. I wonder what they could stand for ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now