Sunbeamer Posted July 9, 2020 Share Posted July 9, 2020 Hello folks, I am wondering if any one has a drawing/ picture of a spring making jig , I’ve got some broken springs on my old Lachenal I'm using.025” phosphor bronze wire . thanks Quote Link to comment Share on other sites More sharing options...
RAc Posted July 9, 2020 Share Posted July 9, 2020 https://www.concertina.net/forums/index.php?/topic/15386-spring-making/ https://www.concertina.net/forums/index.php?/topic/21321-spring-winder-from-a-film-reel-rewind/&tab=comments#comment-197820 https://www.concertina.net/forums/index.php?/topic/21438-spring-winder-2/&tab=comments#comment-198747 Quote Link to comment Share on other sites More sharing options...
Rod Pearce Posted July 9, 2020 Share Posted July 9, 2020 Have a look at Alex Holden's website for inspiration https://www.holdenconcertinas.com/?p=831 I made this using Alex's jig as a model. It is cruder, but works very well. THe brass hexagon is an old 22mm stop end for copper pipe with the threads sawn off. Since the photos were taken I have added the guide to the right as per Alex's jig. 1 Quote Link to comment Share on other sites More sharing options...
alex_holden Posted July 10, 2020 Share Posted July 10, 2020 Since that blog post I modified the winder slightly to make the arms of the springs about 2-3 mm longer. Quote Link to comment Share on other sites More sharing options...
Sunbeamer Posted July 10, 2020 Author Share Posted July 10, 2020 Thanks everyone! I’ll get winding Quote Link to comment Share on other sites More sharing options...
Robin Harrison Posted July 11, 2020 Share Posted July 11, 2020 here's mine..........an early model I will update this winter............... Concertina spring winder Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.