Search the Community
Showing results for tags 'volume'.
-
In another thread: Boyd Wheatstone Concertinas BW77 mentions some experiments with muting the volume of selected reeds: I have tried a leather baffle on the LHS of my Peacock and while it reduced the volume it also changed the tone. Most of the time I don't use the baffle. Another problem is that it reduces the volume of all of the reeds on that side, whereas I only want to lower the volume of the lowest reeds. I tried 'feathering' the bass buttons with my fingers to see if I could get a decent volume reduction with a very slight button press, but there seems to be quite a cliff edge between sound and no sound so I am not sure if this technique will work for me. I might try some additional washers to see what happens - it is a simple, non-destructive experiment. Then BW77 mentions taping over the pad holes with 'quite interesting' results. Please elucidate. Is that interesting in a good way or a bad way?
-
A few of the higher reeds on my 1914 Wheatstone English tenor-treble sound thin, with less volume than others. I suspect the instrument has been played a lot more in its middle and lower ranges than up high, so part of the difference might be a difference in how much playing-in the different reeds have undergone over the years. The feeble notes speak quite freely and start just as quickly as the others - they just produce a noticeably weaker sound. I have a later Wheatstone (1928) and that has a fairly consistent volume up the scale, which I'd like to achieve in the 1914 one. Is this possible? How can I turn up the volume a tad on those weaker notes? In some cases it's just one of the pair - so the draw speaks louder than the pull or vice-versa. Any guidance would be appreciated. Ray