Search the Community
Showing results for tags 'restoration'.
-
This is a very rare Wheatstone Maccann duet, 79 buttons (correct me if I miscounted) with raised metal ends. Not sure if it can be considered an “Aeola” but it is an 8-sided one, possibly one of the earliest Maccann duets of this size (serial number 24303). The lowest note is C2 and the highest is B6. It is being sold for restoration, it is hardly playable as it is right now, though the bellows themselves are in good condition. It has had a tough life, the photos speak for themselves. It would need a new action board as the original ones have been replaced with metal boards at some point. Could do with new frames too while we’re there… The rest of the components are there, including the aluminium-framed reeds (steel). The raised metal ends are not in bad condition. The left reed pan needs new gasket. It could be used as a source of spares, though given its rarity it’d be sad not to restore and bring it back to fully working order. It would have been a top-notch beast when it left the factory some 120 years ago. Unfortunately this would be quite an expensive job, hence I’m selling it (plus I’m not a duet player), but I’m sure someone will be willing to invest the necessary. Price is £600 + shipping. I’m located in South Yorkshire (UK) currently. I could consider a trade in for an steel-reeded english concertina. More photos available on private message. Thanks.
- 16 replies
-
- 3
-
-
- restoration
- metal ends
-
(and 2 more)
Tagged with:
-
I got this old German-made 5 fold impulsively and cheaply as my entry into concertinas. I want to have a go getting this more playable, changing as little as possible and preserving what I can. I have time, skills and tools but seem to be low on money as always. So far I gather it was made sometime between 1850 and 1940 which isn't greatly precise but enough for me to consider this as something from "the olden days". I don't want to unwittingly ruin anything historical and I plan to keep anything I remove or change because at the very least its interesting. And also write a note about what I do to leave in the case. It is what I would consider playable. Notes seem to be relatively in tune and most all working. Some notes don't sound as easily as others unless the air is pushed harder, I could describe as maybe a bit wheezy and breathy? I've been able to play some basic little tunes (and had a lot of fun so far ) and I'm planning to carefully clean the reeds with something akin to a Q-tip and isopropyl. The bellows seem okay but if you hold one end up and let the other drop without holding any buttons, It will slowly expand over about 16s. I plan to shine a bright light through from the inside of the bellows and patch any holes with a suitable glue and paper or very thin leather. Any recommended glues and kind of paper? (Is PVA wood glue okay?) - Some notes buzz in an old-timey alarm fashion, I figure the pin holding the reed to the plate is loose, do you think this is a nail/ screw/ rivet? - Does each reed need a leather flap? (brown reed flaps as pictured below) Is this potentially the cause of the harder to sound notes that are wheezy? I want to fix the box with new hinges and latches. I don't think I can get the lock working despite having an old key that I ground the tooth on so it fits well and turns but hits a dead end both ways at about 140 degrees. I think I'm best to add some new low profile latches on the outside. I will try make any new brass look old, I love the old look of the case. As I've been told in my previous post, I will store this on its side. I'm thinking some kind of matt Mod Podge or varnish to seal the outside of the case and protect the cool old label. Also may add some old wood splines to some of the loose corner joins. I think it would be cool to keep the splines visible, is this a crime? For the handles, will find some old aged leather that looks the part. I think the thumb button may need fixing too under the bone cap. I can figure these things out! Overall, I don't mind if its a little out of tune and scratchy, as long as its just playable enough. I think the roughness and patchy repairs is charming and suitable for this instrument. Maybe one day I can get (or make...) a better one Any advice is greatly appreciated, and thanks for taking the time to check out this post Even just pointing out any red flag in my approach would help! Happy to take more pics and do progress updates if people are interested. ❤️
-
- repair
- restoration
- (and 4 more)
-
Hi All, a first post, hope is ok. I’m trying to restore some old concertinas. They are old and cheap manufacture, I’m doing it for fun and to learn… and if I can make them playable to some degree then I’m happy. i just noticed that the orientation of the buttons on them is different. One will sit with a flat side on the knee and one will sit with a corner on the knee. Is this a usual option? I would have thought the former was the usual. Any idea of year of manufacture? They appear to be made of match wood. Bellows seem to be okay…. Cheers.
-
Hey all, I've been working on restoring an old Concertina I picked up at an antique shop, and one of the (many) problems I'm running into is what the button caps are made of, and how they were put together. I attached an image below, does anybody have any knowledge on this, or spares available I could pick up?