Jump to content

Lofty

Members
  • Posts

    107
  • Joined

  • Last visited

Everything posted by Lofty

  1. If your concern is disturbing your family or neighbours, the answer is simple. Borrow some bagpipes. After a very short time, they will be begging you to go back to the concertina.
  2. I own 28614. Interesting that they ended up so far away from each other (I live in England)
  3. This one too: https://www.ebay.co.uk/itm/275238047789?hash=item401577502d:g:esoAAOSwxVRiQZ9P
  4. You could use non-adhesive sew-on Velcro and stitch it through the holes in the woodwork.
  5. My current single acting Wheatstone bass has a large number of holes with valves in the bellows. I call them gills. A previous one (by Lachenal) had a few holes with valves in the ends, I think in the action boards. It was a long time ago: I don’t think it had conventional reed pans which pulled out, as in smaller instruments. The Wheatstone with the gills is a vastly superior instrument to the Lachenal.
  6. Whereabouts do you live? I have a 69 button (plus air) ebony ended Aeola for sale. The right hand starts from the G below middle C. in my view, this is preferable as it provides a better usable range before getting into the squeaky high notes that don’t fit the McCann pattern. The left hand goes from a low F to the C above middle C. Steve
  7. ....this is why I choose to play bellows operated bagpipes??
  8. Bagpipe tunes are designed to work with drones. Steve
  9. That is a thing of astonishing beauty. Steve
  10. Rather than sticking Velcro to a concertina, what about using the sew-on type and stitching it through the fretwork? No risk of damage to the finish. Steve
  11. No, not angry. Just aiming for a balanced view??
  12. I contacted Colin a long time ago (20 years or so) about a replacement for a bass concertina reed which had broken. I had a replacement within a week. Not many people would be able to do that or provide that level of service. I won’t hear a word against him. Steve
  13. Any chance of any photos of your “special”, Jim? Steve
  14. My thought is “If you like that tune enough to want to play it, why are you in such a hurry to get to the end?” Steve
  15. Put a finger through the hole in the reed pan and pull firmly. It should come out but might be a tight fit. As already said, putting your finger through towards the smaller area of the reed pan might help. Before looking for complicated/difficult solutions, check that the reed frame hasn’t become loose in its slot. Just pushing it back into place might do the job. If the problem recurs with the same reed, a very thin paper shim (cigarette papers are good) at the wide end of the reed frame should help it to stay in place. Don’t shim the middle of the reed frame as this might bend it inwards, thus touching the reed. Steve
  16. Definitely try before you buy if you can, based on my experience. I have owned English system Edeophones and never really liked them. I wasn't happy with the tone, volume, responsiveness. I used them as “reserves”, but sold them eventually. Against my experience (and my advice above!) I bought a small (46 button) MacCann Edeophone without trying it. I think it’s a great instrument: fast, responsive, loud, great tone etc. It was meant as a smaller, lighter, alternative to my large (69 button) MacCann Aeola but I prefer playing it, despite its limited range. I wish I had a large Edeophone which was as good as the small one as well! Steve
  17. If you take your finger off the button momentarily when you change directions, you should avoid this problem. It will also make your playing a bit “crisper”. Steve
  18. I agree with what Geoff said earlier. If you can, try a Wheatstone Model 22 or 24. I find Aeolas to be quite “polite” tonally, on the whole. Model 22s or 24s can sound significantly more “pushy”. Steve
  19. Colin Dipper tuned my Wheatstone Model 24 in 1994. It has been played a lot since then and its tuning is still excellent. I recently looked at the set of a few reeds which needed a bit more pressure than others to start sounding and that is much better now. I think it’s probably not the reeds: more likely to be valves or reed shoes being a bit loose. Perhaps modern homes with low humidity are to blame. Others who have more experience of maintenance and tuning may have different opinions. Steve
  20. The ledger for this serial number is available online and you can see the relevant page at http://www.horniman.info/DKNSARC/SD01/PAGES/D1P0270L.HTM The ledger entry shows that it was made in 1912. Enjoy your concertina! Steve
  21. For a moment I thought you were going to say you would practise in the river..... Steve
  22. Thanks for that, Dowright. Steve
×
×
  • Create New...