Notemaker
-
Posts
112 -
Joined
-
Last visited
Posts posted by Notemaker
-
-
Looking at McNeila, (Dublin Ireland), Concertinas and wondering how much extra cost will be added for tax / import duty, if I purchase from there.
Any help muchly appreciated.
Thank you.
-
19 hours ago, Stephen Chambers said:
Who said anything about lowering a full octave?
I'm telling you how to bring D# down a full tone to C# in the same octave without causing any harm to the reed itself, and I do it often for very satisfied musicians.
Sorry, my bad. I was mistaken about which reed you suggested. I have but two RHS keys over it, K1 the 2nd octave, C#""/D#"", and K4 C#"""/D#""" . Clearly modifying D#"" K1 wont work because it is needed for other scales.
Anyway modifying this Concertina might not, in the long term, be a good idea. Instead I hope to acquire another with the Jefferies layout, not particular as to reed type, traditional or accordion.
Thank you.
-
Thanks to David and Clive, correct! I took the end off to have a look, shoes etc are different sizes. JL, well there is swapping 'in' for 'out', have not tried it, but what follows may explain. Stephen you are correct in principle, yet wonder if you know the C# is """, third octave. I should imagine loading it with enough tongue tip to lower a full octave might be a challenge. Then too, it would be a beast to energize.
Have not contacted Geoffrey yet, maybe won't need to.
Explanation, realizing that I am the second user/owner since new led to the decision to keep this instrument as close to original as possible, and so instead of modifying it, I am looking for a beater box in the Jeffries system to take out my urges in that direction. Anything would do, accordion reeded or similar.
Thank you each and all.
-
My Concertina is a Crabb 30 Button Anglo.
RHS ROW 3 button 1, currently at C#' - push / - D#' - draw. I also want to provide the opposite bellows directions, that is C#' - draw/ D#' - push.
But having many pieces learned on the Wheatstone, I don't, at this time, want to go fully Jeffries layout. I never use RHS ROW 3 button 5, can I adapt that? And from where the needed reeds to try out?
Any help greatly appreciated.
Thank you.
-
https://thesession.org/discussions/47387
Folks need be aware these are basket cases left to rot for years in a shed.
Caveat emptor!
C Jeffries 28 button + 1 Anglo system?
2 x C Jeffries 37 + 2 Anglo
C Jeffries 30 + 2 Anglo
Wheatstone Linota 32 + 1 serial # 32451 (Split Bellows) Anglo?
Unknown 50 + 1 English? (Split bellows) -
Have to add, and here I am following Noel Hill's views, there isn't much to compare between a Crabb and a Jeffries, with the same action etc.
So the idea that having Crabb input in the making of a labeled Jeffries, is somehow a defect, to me is utter and complete nonsense!
Prisca, as others have said, maybe you might consider selling something else and keep your beautiful Concertina? Besides you play very well on it. BTW what does the 'funny' label say?
Thank you for posting the picture and video :0)
-
-
'A good pace'?
Well, it depends on which kind of music we have. For example for Morris it would be the dancing which regulates tempo, not the other way around. While in Celtic, esp Irish, there is no set rule.
Because most jams are not for dancing but listening. I should immediately qualify with the rider, except in Ireland where as soon as a group starts to play, the audience get to gabbing. However here in the USA folks will actually not jabber. To drive home the point, there are set tunes/selections specifically played by Irtrad groups for dancing. Recently on these pages mention of 'The New Mown Meadow' is one very popular Reel for Sean Nos Dancing. Another is 'Miss McCloud's Reel'; and OC 'The Bucks Of Oranmore'.
For decorations/embellishments; I do not think it matters too much to a novice.
One talented Anglo player/teacher, Edel Fox, encourages not playing them except where most effective. IOW be sparse and precise. And that means having the skill to do them well, as there is nothing more destructive than a flubbed 'cut', or, yet more annoying, a wobbly 'roll'.
When we are on this topic I do not think a novice can do any of that on a student box because the buttons/movement are not quite up to the job, whereas on a good vintage box it is almost too simple. E.g my Crabb C/G (1965) makes it easy to 'chirp' by tapping a button lightly and quickly.
-
It is a year and a week since on Ebay I won the auction for my Tina. There have been many, many surprises since. During the auction nobody knew which kind of Crabb was on offer. Nor, until I received it from USPS, did I.
First surprise it turned out to be a C/G Anglo with a broken air valve, a few small leaks, but with fair springs, faded leather valve tongues, and a couple of off tune reeds. All of which expertly repaired by Greg Jowaisas, he is here on Cocertina.net, and in fine playing order when I got it back last spring.
From the very start I noticed a lovely scent coming from the bellows when cycled, but imagined it would in time fade away.
Well it has not. And appears to be as strong as ever when I am carefully practicing, yet if I hurry, it goes away.
My last surprise happened by accident while I attempt to make a 'cut' on a note from a Celtic tune, found in a Book. My Tina began to 'chirp', I know that is not unusual among expert players but I, a mere beginner, am anything but!
I have heard people say that the Concertina is loud, but hey, this one is as sweet. I find it most fills a room with a grand aroma when I am doodling with Morris tunes and chording, a bit like I would on a Harmonica. Really, I am not playing bass parts there, more like the odd chord in spots where I think it nicer.
Lately I wonder if ,in a good sort of way, there is such a thing as 'haunting' of such things? Maybe the last owner - my Tina came from an estate sale - is hanging around a deserving loved box, and sends aromas when its Tina is being good?
Hope you enjoyed my report, and have a wonderful Holiday Season.
Notemaker
-
Thank you each for helping, and for the super expert solutions, until reading which, I had no idea how to fix the wear spot.
I am somewhat delayed, because of the crazy Covid19 thing and not finding time to make the picture - I use a Macro Lens & Tripod. So, yes! it is indeed a fabric / leather thing, not wood as the photo shows.
Because my lovely Tina did not have any such blemish when first I seen it,
I will be applying the appropriate cure, and revising my posture, which I suspect is the source of the injury.
On another thread an attempt to relate some of the surprising and wonderful happenings around this grand Crabb C/G Anglo Concertina that happened since the instrument came back to me from Greg Jowaisas; renovated, and playing like new. But that is another story.
Again sorry for the long delay.
-
Noticing some wear on the corner of my bellows, most often on the knee, I see a faint trace of wood coming through. So how do I fix that? Before I get tips on better posture, I already learned that one by just resting the very corner of the bottom on the knee when needed. IOW I practice sensible holding of my lovely Crabb C/G Anglo.
What is used to make the bellows and wooden frame black?
Is it dye? or is it paint?
Would boot polish be a good substitute?Thank you for any help.
NM
-
On 2/1/2020 at 6:18 PM, LateToTheGame said:
I read this as not A/E but A something or other symbol I don't understand and E something or other symbol I don't understand LOL. What that does that mean? I am interested.
I was told he was playing a Bb/F, which would correspond with an A#/E# if that is what those symbols mean.
Well his partner plays/used play on a D / D# Accordion, so using the Eb Anglo Tina, either sort fits in well with that plan.
As to Eb V D#, I think there would have to be a serious re-tuning involved there someplace.
The symbol you wonder about means 'Flat' so A flat / E flat, or Ab / Eb.
-
7 hours ago, wunks said:
What are the types of songs you would like to sing if you weren't thinking in the context of the concertina? Old jazz and cabaret standards, mountain ballads, folk revival, show tunes, British broadsides, ethnic World music? I'll ask, although I'll get in trouble, if you've tried EC or Duet?
Thank you for the suggestion.
Yeah that's it, today we do not have a ready made popular set of songs for Anglo! And, agreed perhaps it might work better on EC or Duet. But any easier folk song would be a start even on the Anglo.
-
My interest in Morris and Celtic has, more or less, per-occupied practice time since I re-started on Tina. Ok, it is my own fault and nobody else is to blame.
But, I do want to caution newbies, if you got into it because you love one kind of material, yet have to get through others - tutors etc., - please make sure you keep to the central focus on your first choice.
Because I now realize what brought me to the Tina is not either I practice on, and there is a reason why this happened. I first chose the Tina because I heard it used as backing for a folk singer, 'chording' and bits of melody etc. Reason why I did not get on that, there is not as much on the net about it, nor can I find any instruction like I can Morris; Peter Trimming on YouTube is a great example.
https://www.youtube.com/channel/UC-EC21xijG_PdX3mUSiQ8UQ
I reckon most of the songsters I have came across sing 'Shanty' type stuff, but I do not think there is any reason why other genres would not work.
Fairly certain that on CN there's quite a few songsters who could usefully redirect me?
Thank you.
-
Thank you all for your expert suggestions.
I like Alex's method best even if it is a bit more work. Noting that brass is easier to work with anyway, and new end bolts solely for a new bellows would be the best way ahead.But I am not stripping the old bellows frames for this project, rather, planning to save the entire good working bellows as it is. Job needs a full new frame with new end bolts and anchors.
-
Considering making a complete spare bellows. Looking at suppliers, I cannot find anything at all about the wee anchors built into my existing bellows end frames.
Any suggestions?
Thank you. -
TBH I do not think it matters so much as to worry. I played ITM on the Chromatic Harmonica for a time. Then I quickly learned that somethings are completely home made to get around decorations. I don't bother too much with them on the Anglo, but have noticed those who do will use any note that works to achieve their goal. LHS G on the C row is topmost, so you'll probably want to try using the LHS G on the G row, and tickle the B - next button up from there.
You mention Edel Fox. If you slow her down on YouTube you will find she uses notes far removed from the main one for her rolls/cuts/ etc.I have no idea what would work best for that.
Curious, why did you move over to the box from the Flute?
Edit:
Just recalled that I use the LHS DRAW G outside row 2nd from top button. That will work with a DRAW A on either G or C row...
:0)
-
5 hours ago, Anglo-Irishman said:
Do you think so?
The general musicological consensus, and my family tradition (as an Irishman, in the British-English sense of the word, namely "a person born and bred in Ireland") agree that most Irish dance tunes are essentially fiddle tunes.
Thanks for the quote.
"Irish dance tunes are essentially fiddle tunes. "
Imagine that!
I am sorry you feel that way. Yet Internet scholarship is rather like cloud sculpture, it may, or may not, endure. Is this claim supported by any accredited scholarly work?
I would be curious to know the answer, yet here in the forum is not a proper place for such, perhaps you might later like to PM me about it. -
After reading Bob Tedrow's excellent webpage about it,
I began pricing the materials needed to make a bellows. Too, it is not clear which width of tape one should select. Judging from the size of his billets, after trimming, 1 1/8", I am guessing the tape size at 1 inch.
But when I saw the price of the Bookbinders' tape Bob recoes, had to look further because I am not rotten rich with money, and, sure enough, on Amazon came up with an alternative.
Bob's reco; from Talas
https://www.talasonline.com/Gummed-Cambric-Tape?quantity=1&size=43
$28.00
What I found on Amazon;
https://www.amazon.com/dp/B00W2DLEX0/ref=twister_B00W2DLETE?_encoding=UTF8&th=1
$12.95
Too, considering most folks having a go at bellows making will be doing just one to start, 150 feet is way too much while 15 yards, 45 feet, is about right.
I am curious, how do other makers deal with this issue? Do we go for the more expensive solution, or elect to follow a popular Bookbinder path?
Thank you for your expert suggestions.
-
On 1/15/2020 at 11:43 AM, mathhag said:
I have thought about this post many times but fear there may be no good answer. But here goes
some of you may know from my previous post that I have only been playing concertina for about 2 1/2 years. It is the first instrument I have ever played and in March I will turn 69.
I have the great benefit of a glorious instrument, Dipper #47 or 147 if you are Colin ( an insurance story) and I have had the opportunity to learn from Doug Barr, Mairead Hurley, and Noel Hill in person . I am using Caitlín’s wonderful online course and had incredible help from Bruce McCaskey. I have been totally smitten with this instrument. Nice that my husband has been totally supportive. He says I have never wanted to spend money on anything before. I have committed to at least one trip each year to learn more. I live in a VERY remote areaSo I play almost everyday and it is my great joy.
Finally I get to my question. Right now I have about 30 tunes I can kind of play, using abc notation primarily. I have only ten that I can play by heart and almost to speed.
Should I be adding tunes, which I love to do or working on getting the tunes I have better?
No!
I think 30 tunes is far too much to be hanging on to. Instead work on mastering your instrument. Because tunes are not hard to image, while playing them in different keys on the Tina is.
Too, our health can, and does, limit how we learn, or try to, and how much we can memorize. I have trouble with that as I grow older, my attention span shrinking with age. There is nothing that can be done for that except work with it!
Though I am not a Concertinist, and have played Harmonica forever, today Tremolo, I recently returned to the hobby due to unexpectedly winning an Ebay auction for a vintage Crabb 30 BTN C/G Anglo, I got that for a song ...lol
However, I do have a system for acquiring tunes to try on my vintage Crabb. (it has the most enchanting velvety sound). First of all I select simple tunes, the shorter the better. I find that besides simple songs, 'Popeye The Sailor Man' for example, Morris provides lovely and easily learned dance tunes, some with little lyrics which are very easy to remember. All the which gently teaches scale, breathing, and grows new nerve links in the ANS.
My latest one is from Cotswold Morris. These are best memorized so one can humm them, or sing them. In my case I love to try them on the Harmonica, then the Tin-whistle, to see how close to 'Spongebob Square Pants' music I am. If I like the result I then set about electing a fingering on the Tina which delivers two principal things; 1 few, or no, air button - bellows helps, and, 2 retains the lilt of the tune.
That is, while I do listen to Noel Hill, Edel Fox, and Caitlin McGowan, I don't want, nor IMHO, need to put that much into a tune. Besides I think the Anglo shines best in other types of music, so, IMHO, it is not a big oversight.
Nevertheless, one needs to be aware that ITM, Irish folk dance music, hangs from just one instrument, and it is not the Fiddle, nor the Uilleann Pipes, nor the Harp, nor the Accordion, nor the Anglo Concertina, nor the Banjo, and so on. The entire tradition grew out of the humble Penny-Whistle. So, in order to get its embellishment near to the source, one should really learn to play that first. Because that is what all those famous people you are learning off of did, or it is from it most of their fiddledy embellishments come.
https://www.facebook.com/noddy.mcnod/videos/10214835206974716/
Now some physiology. When we are learning a tune we internalize an aural image, rather like we become familiar with a picture, for example the 'Mona Lisa'. It is from an image we create our singing/humming/whistling, or in my case playing it on the Harmonica - because I have been playing it so long that it is almost as easy as singing.
The next step will be putting it on your chosen instrument. There are several parameters converging which enable, or prevent, that happening. Those will have been addressed in your foundation course/s. For example, where is the 'C3' note, etc; and how to play a series of notes on a bellows push and pull to get the least air valve demand. These skills are management of another set of skills which you should be building, your motor skills. Those which control you fingers and arms when playing.From experience I found that it pays to perfect motor skills very early in the learning process. So I do a lot on scales, and different ways of playing the same scale on the Tina. It is just like Violin in that regard, one needs to be able to think of a variation in an aural, but not have to think about how to execute it; that is, have over developed motor skills so they become automatic. IOW the secondary ANS becomes a robot for the CNS, which is actually how our body works in mostly everything else. So playing an instrument is very un-natural. That's why when we goof up one note everything after it comes out all wrong.
So, in short, work on the ANS stuff real hard, then the CNS stuff can get out of your TINA, and hopefully in a few different keys :0)
Hope that helps. -
6 hours ago, Steve_freereeder said:
Removing any rust, especially of the degree shown in Notemaker's photo, will almost certainly affect the tuning of the reeds, so it will be necessary to check the tuning of the reeds in situ in the instrument and then carry out any fine tuning (and reed tip set) adjustments, as may be needed.
Thank you.
Well, touch wood, so far, I have not heard any need to have the reed adjusted. But then again, with the gString tuner app, did not measure its pitch before, or after. So you are probably correct but, at this time I cannot detect any difference in the sound I hear from it.
-
5 hours ago, RAc said:
I'm not sure. Either you misread my question or I misread your answer.
Thanks!
I misread your original question. Hope you get it resolved.
-
On 1/11/2020 at 7:27 AM, RAc said:
Hi there,
I am trying to find a metronome that "listens" to its environment for a beat and starts to tick autonomously once it "locks on" that beat.
Thanks!
Here is something I actually know about ...lol Ok from a Teaching perspective, its easily fixed. Simply set your timer click slow, like 60 BPM. Then imagine yourself walking in step. Then drumming instep, then have a go with playing instep.
There is one condition to this method, know the melody off well before you start, IOW know how to humm, whistle etc., the music without a score, which almost always means selecting something you already know well instead of the piece which gave rise to the need in the first place.
Its a separate skill and needs developing outside of the reading music thing.
Hope that helps.
-
On 1/11/2020 at 3:00 AM, Alex West said:
If the rust is too significant to clean off with a pen like this, then it's likely that the reed has been fatally compromised
Whether it changes the tuning or not ...In my experience, most of the rust seems to accumulate towards the middle of the reed
Alex West
Thanks.
You may like to learn that removing a lot of rust from it may not impact the performance of a reed tongue.
This one was brushed with a wee nylon bristle brush, then polished with a wee brass bristle brush. Following approval, from a steel expert, I gently painted over using a cotton swab with a drop of Mineral Spirits on it to finish off the treatment. There is NO noticeable difference in performance, and, surprisingly, no change in the tuning of the reed tongue. On my current bench ( Harmonica Tuning bench ), this is the only case which needed TLC. BTW not expecting to have to write a full report about it, I did not bother to make the 'after' macro shot, which, as you possibly can appreciate, is quite complex and time consuming.
Concertina imports from overseas to the USA, how much tax / duty is required?
in Buy & Sell
Posted
Well I could only find one which https://mcneelamusic.com/concertinas/the-phoenix-concertina/ I liked with the Jeffries layout, and am thinking about it.
Yet if, instead, I find something similar elsewhere may have a go at it
I should mention, already have, and enjoy, a beautiful original Crabb 30 Btn C/G made in April 1965 by Henry and Neville Crabb. But; it is Wheatstone layout which sort of blocks me from some pieces best done in the Jeffries. I did consider modifying my beloved Crabb, but when I realized that would mean cutting on the reed slots, decided against. Most especially as the 2nd playing owner and the lovely condition of the instrument; it would be a crime to destroy an original !