Jump to content


Photo

Blank Reed Slots In 26B Lachenal Anglo


  • Please log in to reply
8 replies to this topic

#1 nkgibbs

nkgibbs

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 268 posts
  • Location:Cheshire

Posted 13 July 2016 - 10:38 AM

Dear Cnetters,

I have just opened up a recently acquired 26 button Lachenal Anglo #47891 and found that the reed pans at both ends have been cut for 28 buttons which leaves two reed chambers empty as shown in the photo below.

photo-9.JPG

Maybe this is common but I am not sure that I have noticed it before??

 

Neil

 

 



#2 Takayuki YAGI

Takayuki YAGI

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 257 posts
  • Gender:Male
  • Location:Japan

Posted 13 July 2016 - 12:35 PM

I opened my 22b and found that there was extra space to accommodate 24th reedset but without reed chamber like above.

sR0013449.jpg



#3 nkgibbs

nkgibbs

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 268 posts
  • Location:Cheshire

Posted 13 July 2016 - 12:50 PM

Dear Takayuki,

Yes, extra chambers are quite common but the strange thing with my 26b is that the reed slots were drilled out.

Best regards,

Neil



#4 Takayuki YAGI

Takayuki YAGI

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 257 posts
  • Gender:Male
  • Location:Japan

Posted 13 July 2016 - 02:28 PM

Dear Neil,

Thank you for your input.

Viewing detail of your reedpan photo, its for 30b, not 28b.

So my guess is that it was carried over from 30b standard parts for some reason (temporary parts shortage?). Anyway it is rare I think.

Best regards,

--

Takayuki



#5 Stephen Chambers

Stephen Chambers

    Ineluctable Opinionmaker

  • Members
  • PipPipPipPipPipPip
  • 4402 posts
  • Gender:Male

Posted 18 July 2016 - 02:22 PM

I've come across extra reed slots cut in the pans before, and even instruments that had the extra holes drilled in the pallet board with levers and (glued down) pads fitted, but no button holes in the fretwork. Such things may not be terribly common, but I wouldn't regard them as too unusual either.

 

They may have been the results of errors, or specifications changing in the course of manufacture, or simply using parts that were immediately available to make up an order.



#6 nkgibbs

nkgibbs

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 268 posts
  • Location:Cheshire

Posted 18 July 2016 - 06:19 PM

Stephen,

Thanks, as always, for your sage comments.

The valves on my concertina had been replaced at some time and even one of the empty slots managed to get one from the diligent repairer!

Neil 



#7 geoff lowes

geoff lowes

    New Member

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Location:Tasmania

Posted 04 August 2016 - 11:26 AM

Hi,  I bought a 28 button Lachenal at auction recently and found 30 button reed pans inside complete with all reeds but no holes drilled in the action board nor any levers pads or buttons. The reed pans look original and I put it down to a shortage of the correct parts at the time of assembly. I regard it as an unexpected bonus. Regards Geoff.



#8 nkgibbs

nkgibbs

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 268 posts
  • Location:Cheshire

Posted 09 August 2016 - 08:24 AM

Geoff,

That sounds a very welcome bonus.

It will not be that easy but I'm sure that members of C.net can offer advice about adding buttons etc ....that advice may be 'don't'! 

Regards,

Neil



#9 nicx66

nicx66

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 147 posts
  • Gender:Male
  • Location:upstate ny

Posted 09 August 2016 - 07:03 PM

certainly better than the other way around, i.e. extra buttons that do not have any reeds to sound.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users