Jump to content


Photo

Harmonikas Reed Sets And Dimensions

reeds harmonikas dimensions build anglo hybrid

  • Please log in to reply
4 replies to this topic

#1 sami.rantasalo

sami.rantasalo

    New Member

  • Members
  • Pip
  • 4 posts
  • Gender:Male
  • Location:Tampere, Finland

Posted 01 February 2018 - 11:07 AM

I'm looking into ordering a (accordion style) reed set for a 30 key C/G anglo build I have under work. I have an "early" Rochelle at the moment and through the build I hope I will get at least a smaller and lighter instrument. Aiming for an upgrade in the playability as well. Buying a better instrument unfortunately is not an option at the moment as money is scarce.  

 

Looking through the forum posts it seems several people have ordered reed sets from Harmonikas. I would appreciate any shared insight into ordering specifics (e.q. how did you specify the set) and price differences between sets (A mano professional, Tipo a mano & export dural). 

 

Also how am I supposed to read the plate dimensions (sortiment sizes pdf)? I'm not familiar with reed combinations used in accordions, so would the dimensions be different for reed-combinations specific for a concertina? Or would you happen to have them for a 30k c/g set? I'd like to start working on (drawing and machining) the reedpans as my access to a cnc milling tool is limited and in worst case any workshop access might come to an abrupt end. I'm aware it's not the ideal order of doing things but ah so it go.

 

 



#2 sami.rantasalo

sami.rantasalo

    New Member

  • Members
  • Pip
  • 4 posts
  • Gender:Male
  • Location:Tampere, Finland

Posted 06 February 2018 - 04:18 PM

Could someone perhaps confirm that I have interpreted Harmonikas' website information correctly?

 

44OJ8BH.jpg

 



#3 ttonon

ttonon

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 198 posts
  • Gender:Male
  • Location:New Jersey, USA

Posted 08 February 2018 - 11:24 AM

Hi Sami,

 

Would you please explain the columns labelled c.Nr.No. and # ?  Thanks.

 

Tom



#4 sami.rantasalo

sami.rantasalo

    New Member

  • Members
  • Pip
  • 4 posts
  • Gender:Male
  • Location:Tampere, Finland

Posted 10 February 2018 - 03:58 AM

Hi Sami,

 

Would you please explain the columns labelled c.Nr.No. and # ?  Thanks.

 

Tom

 

Ah, I'm sorry. I repeated the notation used in the two resources (Sized and Range of Reeds) provided by Harmonikas, the same two I used to come up with the table. 



#5 Theo

Theo

    Heavyweight Boxer

  • Members
  • PipPipPipPipPip
  • 1630 posts
  • Gender:Male
  • Location:Gateshead, England. Land of the Angel of the North!

Posted 10 February 2018 - 04:54 AM

Hi Sami,

 

Would you please explain the columns labelled c.Nr.No. and # ?  Thanks.

 

Tom

 

 c.Nr.No is a reference number for the pitch of each reed tongue.  It goes up in sequence by one for each semitone.  Italian makers have a similar system, but it it starts from a different pitch, so don't mix them!

 

#  is Harmonikas' reference number for a particular size of reed plate.   For example #7 is 43.5mm x 16mm x 3.5mm







Also tagged with one or more of these keywords: reeds, harmonikas, dimensions, build, anglo, hybrid

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users