Jump to content

John Connor Rebuild Naming


Recommended Posts

My John Connor Rebuild Anglo has the usual round hole on either metal end-plate for the maker's name but they are both blank and just empty holes. Is this usual and/or a problem? I don't want to mess with this and cover them (by making a label) unless it's thought necessary. However, the maker's name doesn't appear anywhere that I can find and that may mean in years to come, when it gets passed on, no-one may remember who made it.

Link to comment
Share on other sites

Is the 'Shire' by Connor? I have seen his own models named down the middle as it were and I suppose that may be what you refer to.

 

Edited because I now see it is another maker.

Edited by Hereward
Link to comment
Share on other sites

Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here.

 

Dave

Link to comment
Share on other sites

Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here.

 

Dave

The whole instrument was built by Connor except for the reed pans and reeds which are Wheatstone. I don't know anything else about it.

Link to comment
Share on other sites

As far as I know, Connor rebuild models are produced by John Connor in collaboration with Barleycorn(Chris Alger) using Wheatstone or Lachenal reeds.

Mine is built by Connor (including reedpan) with old Lachenal reeds and has no makers name outside. Inside of the instrument there is a stamp of Barleycorn.

Link to comment
Share on other sites

As far as I know, Connor rebuild models are produced by John Connor in collaboration with Barleycorn(Chris Alger) using Wheatstone or Lachenal reeds.

Mine is built by Connor (including reedpan) with old Lachenal reeds and has no makers name outside. Inside of the instrument there is a stamp of Barleycorn.

Thank you. So it sounds to me that mine is similar to yours. John Connor is now retired.

Link to comment
Share on other sites

 

Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here.

 

Dave

The whole instrument was built by Connor except for the reed pans and reeds which are Wheatstone. I don't know anything else about it.

 

 

I Seem to remember, and I am fairly certain about this that these instruments were known a 'Phoenix' instruments, rising out of the ashes and all that. Nothing to do with a certain H Potter...

 

Dave

Link to comment
Share on other sites

 

 

Do you know the original manufacturer? If not then post photos of the end plates and if you can, the action pivot arrangements, these things can usually be worked out be the combined experience of the many here.

 

Dave

The whole instrument was built by Connor except for the reed pans and reeds which are Wheatstone. I don't know anything else about it.

 

 

I Seem to remember, and I am fairly certain about this that these instruments were known a 'Phoenix' instruments, rising out of the ashes and all that. Nothing to do with a certain H Potter...

 

Dave

 

I think that is Wakker Phoenix. Collaboration work by Wim Wakker and Barleycorn. I think Connor rebuild do not have such name...

Link to comment
Share on other sites

  • 2 weeks later...

my conner has conner stamped in the ends and a brass label on the hand rail that says Barleycorn Concertina. I think Chris Alger's name is on that plate as well, but I don't have the instrument with me to check.

It is certainly interesting that your instrument features this because none of the others I have heard tell of do.

Link to comment
Share on other sites

  • 2 weeks later...

Yes, the brass plate exists. If I were smart enough I'd attach a picture, but I don't know how. I do have the concertina in front of me right now. It is an older one of his. The end plates look more detailed than the newer ones I have seen. I got it used from Chris Alger when its owner moved up to her Dipper. That was in the early 90's or maybe even the late 80s. And it is now my second concertina as I have moved up to a Dipper as well for daily play. The plate is brass, but only has the word Barleycorn, not Chris Alger's name as I first thought. It is funny how memory works. The imprint CONNER runs along the rows above the c row. It does not have a hole for a nameplate. The original owner wrote her name and "stolen from" inside, but you have to take it apart to see the details. When I emailed Chris Alger regarding this concertina last year he not only remembered seeing that writing, but remembered the owner's name and where she moved to as an adult. It is an interestingly small world. I got it before hybrids were a thing so I was fortunate to learn to play on a concertina reeded instrument.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...