Paul Read Posted September 24, 2003 Share Posted September 24, 2003 (edited) Has anybody any recommendations on re-finishing ebonised ends (on a Wheatstone Aeola).. Mine has worn off locally where the heels af the hands touch (or damaged by sweat) It is still shiny but you can see the grain. Also, any suggestions re polishing the ends (ebony)? Edited September 24, 2003 by Paul Read Link to comment Share on other sites More sharing options...
yerpalal Posted September 25, 2003 Share Posted September 25, 2003 Paul, In the world of antique restoration the only way to refinish is not to refinish. The only acceptable course is to French Polish the area to preserve the wood. If one polishes with the addition of mineral oil the finish will be more resistant to water. Some of the "restorers" will tell you to overspray with nitro, which is OK if you don't "care". Take the instrument to a professional. As the procedure is not simple. Good Luck, Al W. Link to comment Share on other sites More sharing options...
d.elliott Posted September 26, 2003 Share Posted September 26, 2003 If you are thinking of 'local' repairs to worn areas, then please don't. Unless you are skilled at putting 'umpty' layers of french polish on, then take it to an antique furniture restorer, take out the action box felt bushes, and expect to have to ream out the key holes and re-bush the action box ends. Don't let them sand off too much wood from around the key holes as these are tapered with a very short parallel section at the outer end of the hole. You then have the decision to take about re-polishing the veneered and ebonised action box frame edges to match. If you want to do its yourself get pre-made up spirit black to re apply the stain, after having removed the old finish and re-flatted the worn and chipped woodwork. Then use ebony 'flavoured' black french polish let down with methelated spirits to build up the full depth of the polish, may be in excess of a dozen coats, flatting back every so often. Apply with a cloth 'rubber' not a brush. Finsh with superfine 'OOOO' grade wire wool and wax I can give you material suppliers if you are UK based Or just see the character of the instrument, and leave well enough alone. Dave Link to comment Share on other sites More sharing options...
Paul Read Posted September 27, 2003 Author Share Posted September 27, 2003 Thanks guys. I think that I'll leave well alone as it is working beautifully at present. Aesthetics are all very well but: if it ain't broke......... Link to comment Share on other sites More sharing options...
JimLucas Posted September 27, 2003 Share Posted September 27, 2003 Aesthetics are all very well but... In the end, "aesthetics" are a matter of personal preference, an example being the concertina I have where somebody put black paint over the amboyna woodwork. Link to comment Share on other sites More sharing options...
d.elliott Posted September 28, 2003 Share Posted September 28, 2003 Thanks Jim, you just spoiled my breakfast! Dave Link to comment Share on other sites More sharing options...
JimLucas Posted September 28, 2003 Share Posted September 28, 2003 ...the concertina I have where somebody put black paint over the amboyna woodwork.you just spoiled my breakfast! Fear not. First of all, it's a metal-ended duet, and so it's only the veneer on the framing bits and the handles. Secondly, the paint didn't soak in (I noticed the amboyna where the paint was worn), and I'm going to have it properly restored. Now enjoy your breakfast. Link to comment Share on other sites More sharing options...
d.elliott Posted September 28, 2003 Share Posted September 28, 2003 QUOTE ...the concertina I have where somebody put black paint over the amboyna woodwork. you just spoiled my breakfast! Fear not. First of all, it's a metal-ended duet, and so it's only the veneer on the framing bits and the handles. Secondly, the paint didn't soak in (I noticed the amboyna where the paint was worn), and I'm going to have it properly restored. Now enjoy your breakfast. Jim: Can't, 'She who must be obeyed' has me on a volume control programme, nothing to do with weight you understand. Its just my clothes seem to have shrunk a little around the middle. Dave Link to comment Share on other sites More sharing options...
yerpalal Posted September 28, 2003 Share Posted September 28, 2003 JL, even if the instrument were not metal ended, a restoration would be possible and without any sanding whatever. No wood fiber loss, or at least "very" minimal. Restoration technique is pretty darn advanced these days Acetone, a jewlers loup and a scalpel will do wonders. Where there's a wallet there's a way. XXOOO AW Link to comment Share on other sites More sharing options...
pav, in edinburgh Posted April 26, 2020 Share Posted April 26, 2020 As someone looking for details of finish repair on an "ebonised" Thonet bentwood rocking chair, finding advice that also relates to my Wheatstone Baritone Aeola is an unexpected treat - it must be my lucky day... Except that since 2003 we now have lockdown & covid-19... Link to comment Share on other sites More sharing options...
SteveS Posted April 27, 2020 Share Posted April 27, 2020 On 9/26/2003 at 5:20 PM, d.elliott said: If you are thinking of 'local' repairs to worn areas, then please don't. Unless you are skilled at putting 'umpty' layers of french polish on, then take it to an antique furniture restorer, take out the action box felt bushes, and expect to have to ream out the key holes and re-bush the action box ends. Don't let them sand off too much wood from around the key holes as these are tapered with a very short parallel section at the outer end of the hole. You then have the decision to take about re-polishing the veneered and ebonised action box frame edges to match. If you want to do its yourself get pre-made up spirit black to re apply the stain, after having removed the old finish and re-flatted the worn and chipped woodwork. Then use ebony 'flavoured' black french polish let down with methelated spirits to build up the full depth of the polish, may be in excess of a dozen coats, flatting back every so often. Apply with a cloth 'rubber' not a brush. Finsh with superfine 'OOOO' grade wire wool and wax I can give you material suppliers if you are UK based Or just see the character of the instrument, and leave well enough alone. Dave Alternatively you might want to finish to a shiny gloss rather than a waxed sheen. In this case you will polish the layers of shellac with a cloth rubber with a little methylated spirits. This is my preferred finish. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now