Jump to content


Photo

Identifying A Single Action Baritone English


  • Please log in to reply
2 replies to this topic

#1 Howard Mitchell-Borts

Howard Mitchell-Borts

    Chatty concertinist

  • Members
  • PipPipPipPip
  • 163 posts
  • Gender:Male
  • Location:Thorpe Satchville, Melton Mowbray, UK

Posted 02 March 2017 - 11:34 AM

I've recently resurrected a baritone concertina which I've had for many years but it needed new bellows.

The bellows are being made. Can anyone identify the instrument?

 

Here are links to several photos.

There are no identifying marks other than L and R on the reed pans and L6 and R6 on the inside of the bellows frames and

the thumb screws have intertwined letters CAP engraved on them, see screw.jpg. 

 

http://www.hgmitchell.co.uk/reeds1.jpg

http://www.hgmitchell.co.uk/reeds2.jpg

http://www.hgmitchel....uk/action1.jpg

http://www.hgmitchel....uk/action2.jpg

http://www.hgmitchel....uk/action3.jpg

http://www.hgmitchell.co.uk/frets1.jpg

http://www.hgmitchell.co.uk/frets2.jpg

http://www.hgmitchell.co.uk/screw.jpg

 

The bellows are in green leather with dot and cross papers and have air valves in the lower folds. There appears to have been a fine mesh inside the fretwork but it has mostly disintegrated.

It comes in a wooden box matching the instrument with a very faded and torn red lining.

 

Thanks

 

Mitch

 

 



#2 Mike Acott

Mike Acott

    Member

  • Members
  • PipPip
  • 23 posts
  • Gender:Male
  • Location:just North of Ipswich, Suffolk

Posted 02 March 2017 - 11:54 AM

Hello , From the actio and reed photos you have a Wheatstone from about the 1880's. My 56 key C bass is from a little later, I hope you enjoy the end result.

Regards.

Mike Acott



#3 d.elliott

d.elliott

    Heavyweight Boxer

  • Members
  • PipPipPipPipPip
  • 1222 posts
  • Gender:Male
  • Location:Sheffield, South Yorkshire, England

Posted 06 April 2017 - 12:20 PM

I tend to agree with Mike, the double riveted reeds were the first clue, the action pivot posts is the second, and the shaped lever arm profile is the third clue.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users